CellarPro 6200VSx-ECX Cooling Unit (Exterior) #14785

$5,195.00
Shipping calculated at checkout.

Options and sizing support available. Contact us at 866-973-1100 or info@vineyardwinecellars.com.

Specifications

    • Capacity: 5712 BTUH @ 55F
    • Size: 16 1/4w x 31 3/4d x 22 1/10h (in)
    • Weight: 180 lb
    • Power/Rating: 115V AC / 60 Hz
    • Compressor Amps:
      • Common dedicated 15-amp circuit is required to power the unit.
      • Startup: 48.3 Amps
      • Unit Amp Rating: 8.4 Amps (high fan speed)
      • Total Watts with Low Fan: 727
      • Total Watts with Evaporator Off / Low Fan: 727
    • BTUH @ 55F:
      • Low Fan Speed: 5444
      • High Fan Speed: 5712
      • 3/4 Ton Nominal

    Installation Demo

    Description

    5712 SENSIBLE BTUH @ 55F. CellarPro's 6200VSx-ECX cooling units (3/4 Ton Nominal) are suitable for external installations from 20F to 110F in residential and commercial wine cellars up to 1900 cubic feet.

    Performance testing shows that this unit maintains optimal cellar temperature and humidity conditions in extreme conditions up to 110F more effectively than similar units from competing brands. 6200VSx-ECX units use energy-efficient EC fans and are significantly quieter than comparable units from other brands. Visit our Learning Center for data tables, performance charts and product comparisons among different brands.

    Assuming R19 insulation throughout the cellar, 55F inside the cellar and 85F outside the cellar. Cold-side ducting, glass and/or uninsulated walls, extreme humidity, altitude and other factors may affect the sizing calculation.

    Please note: Our units were not designed for, and our warranty does not cover damage from, marine exposure (within 5 miles of the ocean). In these environments, you will need an applied coating, such as Insitu®, to protect against corrosion that is common in coastal regions.

    Our cooling units are designed to be used in properly-constructed wine cellars that are adequately insulated, airtight and sealed with a vapor barrier. In improperly-constructed cellars, the cooling unit will create excess condensation, leading to damage and premature failure of your cooling unit (not covered by warranty).

    Features

    CellarPro 6200VSx-ECX Cooling Unit (P/N 14785). NOW WITH ENERGY-EFFICIENT EC FANS! Designed for external installations, CellarPro engineered the 6200VSx-ECX cooling unit to provide maximum cooling power and adjustable humidity control for cellars up to 1,900 cubic feet. 6200VSx-ECX units are built with high-output Tecumseh rotary compressors and oversized coils for maximum performance in high-temperature environments up to 110F. These units also feature variable-speed fans with a low setting for quieter operation when conditions permit. Beginning with the 6200VSi cooling unit for interior installations, we've added to the 6200VSx-ECX an exterior weather hood, cold-temperature compressor heater, coated condenser coils, double-powdercoated exterior case, reusable aluminum filter and exterior-grade power cord.

    All air-cooled refrigeration equipment requires fresh air intake to dissipate the heat generated by the cooling unit. The fresh air intake CANNOT come from the wine cellar space - it must come from space outside the cellar.

    • Now with energy-efficient EC Fans on both the cold and hot sides, save $300.18 in annual energy costs vs AC fans (assumes 75% runtime and $0.15/kWh)
    • This unit can be configured to operate in extreme temperature conditions (-20 to 110F), with the rear of the unit exposed to shaded external environments.
    • Dual high-output centrifugal fans come with variable speed settings for your choice of maximum cooling power at the high fan speed, or quieter operation (57 decibels) at the low fan speed.
    • The cold side of the cooling unit can be ducted with our duct hoods and kits.
    • Adjustable humidity control combines a high-output compressor with flexible fan cycles to maintain a recommended level of moisture inside your cellar.
    • Extra-large coils generate maximum cooling power inside the cellar.
    • Excess condensate is managed with a high-capacity stainless steel drain pan, welded 1/2" drain line and 100W electric heating element with "On/Off" Control.
    • Commercial-grade Electrofin coating protects the evaporator and condenser coils from leaks and corrosion.
    • Intuitive LED display panel mounted on the evaporator with digital programmable thermostat is simple and easy to use. Remote thermostat is available as an upgrade.
    • Energy-saver mode, quick-chill mode, and auto-defrost cycle provide convenient solutions to common cellar needs.
    • Temperature set point range is 47F to 62F when the cooling unit is properly sized.
    • Unit operates with minimal vibrations and less noise than comparable units from competitors.
    • Audible and visual alarms and maintenance-needed indicator protect the cooling unit and the wine cellar.
    • With dual power sources and a 10-foot power cord, the unit can be plugged into a receptacle from either the front or the rear of the cooling unit, providing flexibility for most installations.
    • Common dedicated 15-amp circuit is required to power the unit.
    • Our easy-access reusable aluminum air filter protects the condenser coils and increases the expected useful life of the cooling unit.
    • Adjustable mounting brackets, included as standard equipment, ensure easy installation.
    • Removable steel case and refrigerant access valve provides access to the internal components for servicing and repair.
    • CellarPro's 5-Year Standard Warranty, the most thorough in the industry, protects the unit against manufacturing defects.
    • An optional Extended Warranty (P/N 1836) is available for additional protection.
    • ETL Tested and Certified to rigorous UL Standards for safety.

                                      Configurations

                                      • CellarPro 6200VSx-ECX units are self-enclosed, fully-charged units designed to be installed through an external wall.
                                      • 6200VSx-ECX units can be located remotely from the cellar with the addition of one of our front duct packages (however, the entire unit cannot be located in an external environment). Offered with or without insulated flex ducting, in a choice of configurations for low or high humidity conditions, our front duct packages allow these cooling units to be ducted up to 50 equivalent feet away from the cellar using 10-inch ducting.
                                      • When calculating equivalent feet, each 90-degree turn counts for 8 feet.
                                      • For remote or inaccessible installations, we offer a remote control display kit which is wired to the cooling unit and allows the digital display to be mounted inside or outside the cellar.
                                      • 6200VSx-ECX units require fresh air intake at the rear of the cooling unit, and are designed to handle shaded environments ranging from 20F to 110F.
                                      • For installation in environments below 20F down to -20F, it will be necessary to add our Fan-Cycling Switch (P/N 6972).
                                      • The front of the cooling unit should never be exposed to temperatures below 32F.
                                      • A CellarPro cooling unit must always be used in the upright position, and should never be operated on its side or upside down.

                                      Options & Upgrades

                                      Cold Temperature

                                      • Compressor Heater #1727: protects the unit when installed in environments that drop below 40F down to 20F - INCLUDED.
                                      • Fan Cycling Switch #6972: supports the unit in temperatures below 20F and as low as -20F when combined with our compressor heater.

                                      Duct Hoods

                                      • Duct Hoods (Cold Side) (#16667 for low-humidity environments or #16668 for high-humidity environments) and Kits (#14680 for low-humidity environments or #15088 for high-humidity environments): permits the cooling unit to be located remotely, up to 50 equivalent feet away from the cellar using 10" diameter ducting.

                                          Filters & Grills

                                          • Use our filter & grill guide to find the cooling unit filter or duct filter and/or duct grill that is appropriate for your cooling unit.

                                          Remote Thermostats, Displays & Probes

                                          • Networkable Thermostats #27346 and #27310: connect your cooling unit to a networkable, wi-fi enabled thermostat (sold separately). Must be ordered at the same time that the equipment is ordered. Other limitations apply - read the networkable thermostat description for more information. Includes 10 feet of wiring.
                                          • Remote Display #1603: lets you place the digital panel wherever you want, whether inside or outside the cellar. Includes 10 feet of wiring.
                                          • Bottle Probe #1434: this remote thermostat with a 10-foot cord overrides the thermostat on the face of the cooling unit, and allows it to monitor air or liquid temperatures at various locations inside the cellar.
                                          • Extension cords available in 25-foot (#1780) and 50-foot (#1781) lengths.

                                              Click the following links for more information

                                                      Have a question?

                                                      We're here for you! Need help selecting the correct unit? We offer free consultation and sizing.

                                                      Contact an expert

                                                      Made in the USA

                                                      Experience the quality and craftsmanship of American made goods.

                                                      Ships within 1-2 weeks

                                                      Our products are made to order and ship to your doorstep within 1-2 weeks.

                                                      Contact us for current lead times

                                                      Limited Warranty

                                                      Experience the peace of mind that comes with our Limited Warranty Coverage.

                                                      Testimonials

                                                      People are talking

                                                      Transform a room into a destination

                                                      Make your home or business the place to be for a spectacular wine experience, beckoning people to linger and enjoy.

                                                      Protect your investment

                                                      From residential to commercial, small-scale upscale to grand luxury, traditional or modern, we can help you achieve the style and the vibe you’re seeking.  

                                                      Professional & straightforward guidance

                                                      Get professional guidance from a responsive partner to ensure your space is done right. Our hands-on approach ensures your wine space is done right—with the highest levels of craftsmanship.    

                                                      Let's Talk

                                                      We’ve been helping our clients bring 5-star wine amenities into luxury homes and commercial spaces for over 20 years.

                                                      About Us