CellarPro 6200VSi-ECX Cooling Unit #14679

Shipping calculated at checkout.

Options and sizing support available. Contact us at 866-973-1100 or info@vineyardwinecellars.com.


    • Capacity: 5712 BTUH @ 55F
    • Size: 16 1/10w x 28d x 22h (in)
    • Weight: 170 lb
    • Power/Rating: 115V AC / 60 Hz
    • Compressor Amps:
      • Common dedicated 15-amp circuit is required to power the unit.
      • Startup: 48.3 Amps
      • Unit Amp Rating: 8.4 Amps (high fan speed)
      • Total Watts with Low Fan: 727
      • Total Watts with Evaporator Off / Low Fan: 727
    • BTUH @ 55F / Decibels:
      • Low Fan Speed: 5444 / 57 dBA
      • High Fan Speed: 5712 / 59 dBA
      • 3/4 Ton Nominal

    Installation Demo


    5712 SENSIBLE BTUH @ 55F. CellarPro's 6200VSi-ECX cooling units (3/4 Ton Nominal) are engineered for wine cellars up to 1,900* cubic feet in both commercial and residential wine cellars.

    Performance testing shows that this unit maintains optimal cellar temperature and humidity conditions in extreme conditions up to 110F more effectively than similar units from competing brands. 6200VSi-ECX units use energy-efficient EC fans and are significantly quieter than comparable units from other brands. Visit our Learning Center for data tables, performance charts and product comparisons among different brands.

    Assuming R19 insulation throughout the cellar, 55F inside the cellar and 85F outside the cellar. Cold-side ducting, glass and/or uninsulated walls, extreme humidity, altitude and other factors may affect the sizing calculation.

    Our cooling units are designed to be used in properly-constructed wine cellars that are adequately insulated, airtight and sealed with a vapor barrier. In improperly-constructed cellars, the cooling unit will create excess condensation, leading to damage and premature failure of your cooling unit (not covered by warranty).


    CellarPro 6200VSi-ECX Cooling Unit (P/N 14679). NOW WITH ENERGY-EFFICIENT EC FANS! CellarPro engineered the 6200VSi-ECX cooling unit to provide maximum cooling power and adjustable humidity control for cellars up to 1,900 cubic feet. Designed for internal installations, 6200VSi-ECX units are built with high-output Tecumseh rotary compressors and oversized coils for maximum performance in high-temperature environments up to 110F. These units also feature variable-speed fans with a low setting for quieter operation when conditions permit.

    All air-cooled refrigeration equipment requires fresh air intake to dissipate the heat generated by the cooling unit. The fresh air intake CANNOT come from the wine cellar space - it must come from space outside the cellar

    • Now with energy-efficient EC Fans on both the cold and hot sides, save $300.18 in annual energy costs vs AC fans (assumes 75% runtime and $0.15/kWh)
    • This unit can be configured to operate in extreme temperature conditions (-20 to 110F). If the unit's location does not provide sufficient room for airflow, you may need to purchase a rear duct kit.
    • Dual high-output centrifugal fans come with variable speed settings for your choice of maximum cooling power at the high fan speed, or quieter operation (57 decibels) at the low fan speed.
    • Either the cold side, the hot side or both sides of the cooling unit can be ducted with our duct hoods and kits.
    • Adjustable humidity control combines a high-output compressor with flexible fan cycles to maintain a recommended level of moisture inside your cellar.
    • Extra-large coils generate maximum cooling power inside the cellar.
    • Excess condensate is managed with a high-capacity stainless steel drain pan, welded 1/2" drain line and 100W electric heating element with "On/Off" Control.
    • Commercial-grade Electrofin coating protects the evaporator coils from leaks and corrosion.
    • Intuitive LED display panel mounted on the evaporator with digital programmable thermostat is simple and easy to use. Remote thermostat is available as an upgrade.
    • Energy-saver mode, quick-chill mode, and auto-defrost cycle provide convenient solutions to common cellar needs.
    • Temperature set point range is 47F to 62F when the cooling unit is properly sized.
    • Unit operates with minimal vibrations and less noise than comparable units from competitors.
    • Audible and visual alarms and maintenance-needed indicator protect the cooling unit and the wine cellar.
    • With dual power sources and a 10-foot power cord, the unit can be plugged into a receptacle from either the front or the rear of the cooling unit, providing flexibility for most installations.
    • Common dedicated 15-amp circuit is required to power the unit.
    • Our easy-access disposable air filter protects the condenser coils and increases the expected useful life of the cooling unit.
    • Adjustable mounting brackets, included as standard equipment, ensure easy installation.
    • Removable steel case and refrigerant access valve provides access to the internal components for servicing and repair.
    • CellarPro's 5-Year Standard Warranty, the most thorough in the industry, protects the unit against manufacturing defects.
    • An optional Extended Warranty (P/N 1836) is available for additional protection.
    • ETL Tested and Certified to rigorous UL Standards for safety.


                                    • CellarPro 6200VSi-ECX units are self-enclosed, fully-charged units designed to be installed through-the-wall.
                                    • 6200VSi-ECX units also can be located remotely from the cellar with the addition of one of our front duct packages. Offered with or without insulated flex ducting, in a choice of configurations for low or high humidity conditions, our front duct packages allow these cooling units to be ducted up to 50 equivalent feet away from the cellar using 10-inch ducting.
                                    • When calculating equivalent feet, each 90-degree turn counts for 8 feet.
                                    • For remote or inaccessible installations, we offer a remote control display kit which is wired to the cooling unit and allows the digital display to be mounted inside or outside the cellar.
                                    • 6200VSi-ECX units require fresh air intake at the rear of the cooling unit. If sufficient space does not exist to provide sufficient airflow to the rear of the cooling unit, you may need our rear duct kit.
                                    • 6200VS Series cooling units can be installed completely inside the wine cellar when used with our rear duct kit, which allows you to duct the supply and return airflows from the rear of the cooling unit up to 100 equivalent feet (50 feet per duct).
                                    • For installation in environments below 40F, 6200VSi-ECX units require our Compressor Heater (P/N 1727).
                                    • For installation in environments below 20F down to -20F, we recommend our Fan-Cycling Switch (P/N 6972) combined with our compressor heater.
                                    • The front of the cooling unit should never be exposed to temperatures below 32F.
                                    • A CellarPro cooling unit must always be used in the upright position, and should never be operated on its side or upside down.

                                    Options & Upgrades

                                    Cold Temperature

                                    • Compressor Heater #1727: protects the unit when installed in environments that drop below 40F down to 20F.
                                    • Fan Cycling Switch #6972: supports the unit in temperatures below 20F and as low as -20F when combined with our compressor heater.

                                    Duct Hoods

                                    • Duct Hoods (Cold Side) (#16667 for low-humidity environments or #16668 for high-humidity environments) and Kits (#14680 for low-humidity environments or #15088 for high-humidity environments): permits the cooling unit to be located remotely, up to 50 equivalent feet away from the cellar using 10" diameter ducting.
                                    • Duct Hood (Hot Side) #19090 and Kit #15092: allows you to install the unit completely inside your cellar or in a small space with limited airflow, up to 100 equivalent feet (50 feet per duct) using 8" diameter ducting.
                                    • Duct Kits are the same as Duct Hoods, and also include 2 x 25-feet of insulated (R-6) flex ducting.

                                        Filters & Grills

                                        • Use our filter & grill guide to find the cooling unit filter or duct filter and/or duct grill that is appropriate for your cooling unit.

                                        Remote Thermostats, Displays & Probes

                                        • Networkable Thermostats #27346 and #27310: connect your cooling unit to a networkable, wi-fi enabled thermostat (sold separately). Must be ordered at the same time that the equipment is ordered. Other limitations apply - read the networkable thermostat description for more information. Includes 10 feet of wiring.
                                        • Remote Display #1603: lets you place the digital panel wherever you want, whether inside or outside the cellar. Includes 10 feet of wiring.
                                        • Bottle Probe #1434: this remote thermostat with a 10-foot cord overrides the thermostat on the face of the cooling unit, and allows it to monitor air or liquid temperatures at various locations inside the cellar.
                                        • Extension cords available in 25-foot (#1780) and 50-foot (#1781) lengths.

                                            Click the following links for more information

                                                    Have a question?

                                                    We're here for you! Need help selecting the correct unit? We offer free consultation and sizing.

                                                    Contact an expert

                                                    Made in the USA

                                                    Experience the quality and craftsmanship of American made goods.

                                                    Ships within 1-2 weeks

                                                    Our products are made to order and ship to your doorstep within 1-2 weeks.

                                                    Contact us for current lead times

                                                    Limited Warranty

                                                    Experience the peace of mind that comes with our Limited Warranty Coverage.


                                                    People are talking

                                                    Transform a room into a destination

                                                    Make your home or business the place to be for a spectacular wine experience, beckoning people to linger and enjoy.

                                                    Protect your investment

                                                    From residential to commercial, small-scale upscale to grand luxury, traditional or modern, we can help you achieve the style and the vibe you’re seeking.  

                                                    Professional & straightforward guidance

                                                    Get professional guidance from a responsive partner to ensure your space is done right. Our hands-on approach ensures your wine space is done right—with the highest levels of craftsmanship.    

                                                    Let's Talk

                                                    We’ve been helping our clients bring 5-star wine amenities into luxury homes and commercial spaces for over 20 years.

                                                    About Us