CellarPro 4000Swc-EC Split System Water Cooled #7649

$5,095.00
Shipping calculated at checkout.

Options and sizing support available. Contact us at 866-973-1100 or info@vineyardwinecellars.com.

Specifications

  • Capacity: 3680 BTUH @ 55F
  • Size: 16 3/5w x 12 3/5d x 22 1/10h (in)
  • Weight: 86 lb
  • Power/Rating: 115V AC / 60 Hz

Condensing Unit Dimensions

    • 45 lbs
    • 13.8w x 18.4d x 10.2h
    Evaporator Unit Dimensions (including brackets):
    • 48 lbs
    • 16.6w x 12.6d x 22.1h
  • System Amps:
    • Common dedicated 15-amp circuit is required to power the unit.
    • Startup: 32.0 Amps
    • Unit Amp Rating: 6.7 Amps (high fan speed)
  • BTUH @ 55F / Evaporator Decibels
    • Low Fan Speed: 3130 / 53 dbA
    • Med Fan Speed: 3430 / 59 dbA
    • High Fan Speed: 3680 / 67 dbA
    • 1/2 Ton Nominal
  • Condensing Unit Decibels
    • 60 dbA
  • Installation Demo

    Description

    3680 SENSIBLE BTUH @ 55F. CellarPro's 4000Swc-EC cooling units (2/5 Ton Nominal) are engineered for wine cellars up to 1,000* cubic feet in both commercial and residential wine cellars.

    Performance testing shows that this unit maintains optimal cellar temperature and humidity conditions in extreme conditions up to 110F more effectively than similar units from competing brands. 4000Swc-EC units use energy-efficient EC fans in the evaporator and are significantly quieter than comparable units from other brands. Visit our Learning Center for data tables, performance charts and product comparisons among different brands.

    Assuming R19 insulation throughout the cellar, 55F inside the cellar and 85F outside the cellar. Cold-side ducting, glass and/or uninsulated walls, extreme humidity, altitude and other factors may affect the sizing calculation.

    Our cooling units are designed to be used in properly-constructed wine cellars that are adequately insulated, airtight and sealed with a vapor barrier. In improperly-constructed cellars, the cooling unit will create excess condensation, leading to damage and premature failure of your cooling unit (not covered by warranty).

    Features

    CellarPro 4000Swc-EC Cooling Unit (P/N 7649). NOW WITH ENERGY-EFFICIENT EC FANS! CellarPro engineered the 4000Swc-EC cooling system to provide maximum cooling power and adjustable humidity control for cellars up to 1,000 cubic feet. Split refrigeration systems separate the evaporator from the condensing unit, allowing the noise and heat from the condensing unit to be located away from interior living areas.

    The 4000Swc-EC includes a variable-speed fan on the evaporator with a low setting for quieter operation and a high setting for maximum power. The condensing unit requires a continuous flow of water to cool itself, and does not need ventilation like air-cooled units.

    • Now with energy-efficient EC Fans on the cold side, save $90.37 in annual energy costs vs AC fans (assumes 75% runtime and $0.15/kWh)
    • This unit is designed to separate the heat and noise from the condensing unit from interior living spaces.
    • Our Evaporators are built with high-output centrifugal fans which include variable speed settings for your choice of maximum cooling power at the high fan speed, or quieter operation (53.7 decibels) at the low fan speed.
    • Adjustable humidity control combines a high-output compressor with flexible fan cycles to maintain a recommended level of moisture inside your cellar.
    • Extra-large coils generate maximum cooling power inside the cellar.
    • Excess condensate is managed through a 1/2" drain line that exits from a choice of knockouts in the evaporator.
    • Commercial-grade Electrofin coating protects the evaporator coils from leaks and corrosion.
    • Intuitive LED display panel mounted on the evaporator with digital programmable thermostat is simple and easy to use. Remote thermostat is available as an upgrade.
    • Energy-saver mode, quick-chill mode, and auto-defrost cycle provide convenient solutions to common cellar needs.
    • Temperature set point range is 47F to 62F when the cooling unit is properly sized.
    • Unit operates with minimal vibrations and less noise than comparable units from competitors.
    • Audible and visual alarms and maintenance-needed indicator protect the cooling unit and the wine cellar.
    • Common dedicated 15-amp circuit is required to power the unit.
    • Adjustable mounting brackets are included as standard equipment, and multiple knockouts and access points ensure easy installation.
    • Factory-installed Expansion Valve and Liquid Line Solenoid Valve (optional) ensure maximum operating precision and range.
    • Removable steel case and refrigerant access valve provides access to the internal components for servicing and repair.
    • Sight Glass and Liquid Line Filter/Drier are included for easy installation and maintenance.
    • Oversized Receiver allows for long line sets up to 100 equivalent feet and up to 30 vertical feet.
    • Auto-reset high-pressure switch protects the system by interrupting power to the compressor when system pressure is too high.
    • Evaporator and Condensing Unit are factory-pressurized and shipped with dry nitrogen to ensure leak-free installation.
    • CellarPro's 2-Year/5-Year Warranty, the most thorough in the industry, protects the unit against manufacturing defects.

            Configurations

            • CellarPro 4000Swc-EC units are designed to be installed with the evaporator inside the cellar, and the condensing unit in a remote location.
            • Our Split refrigeration systems offer a choice of wiring:
              1. The Condensing unit can be electronically controlled by and wired to the Evaporator (single power source on the Evaporator side). This configuration requires a 15-amp dedicated circuit breaker.
              2. The Condensing unit can be controlled by a Solenoid valve (dual power source, one each to the Evaporator and Condensing units.) This configuration requires the evaporator to be wired to a 15-amp circuit breaker, and the condensing unit to be wired to a dedicated 15-amp circuit breaker.
            • 4000Swc-EC evaporators can be located remotely from the cellar with the addition of one of our front duct packages. Offered with or without insulated flex ducting, in a choice of configurations for low or high humidity conditions, our front duct packages allow these cooling units to be ducted up to 50 equivalent feet away from the cellar and requires 8-inch (or greater) ducting from start to finish.
            • When calculating equivalent feet, each 90-degree turn counts for 8 feet.
            • When the control panel is difficult to access, we offer a remote control display kit which is wired to the cooling unit and allows the digital display to be mounted inside or outside the cellar.
            • The condensing unit requires a continuous flow of water to cool itself.
            • The evaporator and condensing unit should never be exposed to temperatures below 32F.
            • Access to the left and right side of the evaporator unit is required for installation.
            • All split systems must be installed and charged on site by a qualified HVAC professional. Line-set equivalent feet must be calculated in accordance with ASHRAE guidelines.
            • A CellarPro cooling unit must always be used in the upright position, and should never be operated on its side or upside down.

            Options & Upgrades

              Remote Thermostats, Displays & Probes

              • Networkable Thermostats #27346 and #27310: Included as standard equipment allowing connection of your cooling unit to a networkable, Wi-Fi enabled thermostat (sold separately, Ecobee SmartThermostat Pro #31453). Must be ordered at the same time that the equipment is ordered. Other limitations apply - read the networkable thermostat description for more information.
              • Remote Display #1603: lets you place the digital panel wherever you want, whether inside or outside the cellar. Includes 10 feet of wiring.
              • Bottle Probe #1434: this remote thermostat with a 10-foot cord overrides the thermostat on the face of the evaporator, and allows it to monitor air or liquid temperatures at various locations inside the cellar.
              • Extension cords available in 25-foot (#1780) and 50-foot (#1781) lengths.

              Click the following links for more information

                        Have a question?

                        We're here for you! Need help selecting the correct unit? We offer free consultation and sizing.

                        Contact an expert

                        Made in the USA

                        Experience the quality and craftsmanship of American made goods.

                        Ships within 1-2 weeks

                        Our products are made to order and ship to your doorstep within 1-2 weeks.

                        Contact us for current lead times

                        Limited Warranty

                        Experience the peace of mind that comes with our Limited Warranty Coverage.

                        Testimonials

                        People are talking

                        Transform a room into a destination

                        Make your home or business the place to be for a spectacular wine experience, beckoning people to linger and enjoy.

                        Protect your investment

                        From residential to commercial, small-scale upscale to grand luxury, traditional or modern, we can help you achieve the style and the vibe you’re seeking.  

                        Professional & straightforward guidance

                        Get professional guidance from a responsive partner to ensure your space is done right. Our hands-on approach ensures your wine space is done right—with the highest levels of craftsmanship.    

                        Let's Talk

                        We’ve been helping our clients bring 5-star wine amenities into luxury homes and commercial spaces for over 20 years.

                        About Us